<meter id="fxzxd"></meter>

<dfn id="fxzxd"></dfn><font id="fxzxd"><strike id="fxzxd"></strike></font>
<meter id="fxzxd"></meter>

<font id="fxzxd"></font>
<nobr id="fxzxd"></nobr><font id="fxzxd"><ruby id="fxzxd"><sub id="fxzxd"></sub></ruby></font>

<form id="fxzxd"></form>
    <menuitem id="fxzxd"><del id="fxzxd"></del></menuitem>
    <thead id="fxzxd"><output id="fxzxd"><address id="fxzxd"></address></output></thead>
    <dfn id="fxzxd"></dfn>

    Welcome To Visit SHENZHEN AUTOSTRONG INSTRUMENT CO.,LTD!

    Tel
    0086-(0)755-26978980
    HOME > Company News

    Surface Temperature Probe Operation Manual

    source:AUTOSTRONGwriter:AUTOSTRONGpopularity:pubdate:2016-06-15 17:21【big middel small

     
                 Surface Temperature Probe Operation Manual

    1.Introduction
    This test probe for measurement of surface temperature is designed and manufactured according
    to IEC60035-2-6 Figure 104 standard and similar other international standards.This probe is mainly
    used for test and inspection the temperature rise accessible ability of front and side electric stove and
    oven.The probe for measurement of surface temperature has a 4N thrust in accordance with the
    standards requirements.


     
    2.Technical Parameter:
    Model AUTO-TMT
    Copper sheet Brass with 5mm diameter and 0.5mm thickness
    Thermocouple American OMEGA,k type thermocouple with 0.3mm diameter
    Insulation pipe Polycarbonate with 3mm inner diameter and with 5mm outer diameter
    Handle POM with 4N thrust
    REference Reference IEC60035-2-6 Figure 104
    3.Operation Manual :
    1). This test should be taken after the black test corner test;

    2). Please use the test probe for measuring after electrifying running 60min or reaching a steady statement;

    3).Press the head of the probe on the tested device surface and thrust 4N force,then read the digital until the temperature stability.

     

    真人斗地主